![Absolute_Aluminum_FL_CGA-350.5P_01[1]](https://www.duragates.com/wp-content/uploads/2023/09/Absolute_Aluminum_FL_CGA-350.5P_011-scaled.jpeg)
![Absolute_Aluminum_FL_CGA-350.5P_02[1]](https://www.duragates.com/wp-content/uploads/2023/09/Absolute_Aluminum_FL_CGA-350.5P_021-scaled.jpeg)
![Absolute_Aluminum_FL_CGA-350.5P_03[1]](https://www.duragates.com/wp-content/uploads/2023/09/Absolute_Aluminum_FL_CGA-350.5P_031-scaled.jpeg)
![CGA-350.5P_gate_project_by_Absolute_Aluminum_in_Florida.__They_built_2_gates_for_residences_at_a_golf_club.__21_ft_opening_x_500_lbs_=_LT_is_28_feet[1]](https://www.duragates.com/wp-content/uploads/2023/09/CGA-350.5P_gate_project_by_Absolute_Aluminum_in_Florida.__They_built_2_gates_for_residences_at_a_golf_club.__21_ft_opening_x_500_lbs__LT_is_28_feet1-scaled.jpeg)
Absolute Aluminum in Venice, Florida installed a couple of gates using our aluminum track model, CGA-350.5P.
Both driveway gates were 21 feet wide by 500 pounds. After the tail end/counterbalance was added to these gates the total gate length came to 28 feet long. By using our cantilever hardware, the tail ends of most gates are 30% of the original gate length making it more convenient if there is less space to slide the gate open.