Accomodates
4,400 lbs at 65ft opening
20,000lbs at 30ft opening
Enclosed
r
oller sy
c
st
em helps
omply with
AST
M F2200 &
UL325 saf
standar
et
y
ds
.
Maintenance Schedule
What maintenance is required for the Duragates system? The answer is: None! All you need to do is
keep up with regular inspections and cleaning.
We recommend you:
Check the functionality and integrity of the carriages by:
• Inspect the ground around the carriages for bits of steel that could indicate bearing failure.
• Listen during the cycle for unusual scraping noises.
• Clean the lower area of contact between the wheels and rail in the track.
• Ensure the carriage bolts are tight to the concrete base.
Inspect the fasteners on each of the accessories to make sure all the nuts & bolts are tight.
With minimal upkeep and long-lasting quality, Duragates is a great investment.
2E Chimney Rock Rd., Bridgewater, NJ 08807
Ph: (908) 757-2323 | Fax: (908) 757-3439 | aisales@archirondesign.com
8/25
MAINTENANCE SCHEDULE
MAINTENANCE SCHEDULE
The Duragates system is very low maintenance. The bearings on the wheels are maintenance free sealed bearings and do not need
to be lubricated over their lifespan.
No lubricant should be introduced into the track, wheels, carriages, or in the bottom load bearing track assembly. Lubricants and
oil based products will attract and build up dust, dirt and other materials that will significantly degrade the performance of the
hardware, and shorten it's lifespan.
Maintenance Frequency
The maintenance frequency depends on the application and number of gate cycles.
General Recommendations
Private home or business
Multi-family < 4 units
Warehouse
Every 2 years
Every 2 years
Every 1 year
Multi-family > 4 units
Every 6 months
If the gate is automated, please follow the maintenance schedule for the operator as per the manufacturers recommendations.
Required Maintenance
Carriage/Track
Check the functionality and integrity of the carriages.
Clean the lower area of contact between the wheels and the track.
Confirm that the mounting bolts securing the carriages to the foundation are tight.
Confirm that the fasteners on the End Wheel are secure.
Top Guide Assembly
Check the rollers for wear.
Confirm that the fasteners on the rollers are secure.
Check the condition of the roller covers if applicable.
Gate Stops
Confirm that the fasteners on the End Cups and brackets are secure.
Confirm that the fasteners on the Gate Receiver and bracket are secure.
Warranty
All products have a 2 year warranty. This warranty is limited to the repair or replacement of product parts that FRATELLI
COMUNELLO SPA acknowledges as defective. The warranty does not include the costs necessary for repairing or replacing the
material (e.g. labor costs, rental of equipment etc.).
ARCHIRONDESIGN.COM/COMUNELLO ✛ DURAGATES.COM